usb tran sceivers ultra-low-power transceiver solutions for mobile and portable applications www.stericsson.com october 2009
designed for use with asics, fpg a s, and system chipsets that interface with the physical layer of the usb connection, these transceivers provide reliable usb performance in a u tmi + low pin interface (ulpi ) format and support a full range of mobile and portable applications. key features ? fully compliant with: ? universal serial bus specification revision 2.0 ? on-the-go supplement to the usb specification revision 1.3 ? utmi+ low pin interface (ulpi) specification revision 1.1 ? battery charging specification version 1.0 ? usb 2.0 link power management addendum ? interface support to hi-speed usb host, peripheral, and dual-role device cores ? ability to support 60-mhz, 8- or 12-pin interface between asic and transceiver ? 4-bit dual data rate (ddr) ? 8-bit single data rate (sdr) ? flexibility with chip select pin polarity ? provides an option to fit the asic polarity ? support for wide range of clock frequencies to suit the industrial needs ? 13, 19.2, 24, 26, 38.4, and 60 mhz ? variable i/o voltage support ? 1.65 v to 3.6 v ? integrated hi-speed usb transceiver solutions to minimize external components ? integrated 2.7 v or 3.3 v and 1.8 v regulators ? integrated esd protection circuit ? integrated v bus overvoltage protection circuit ? low power consumption for longer battery life ? typical operating current of 13 ma for full-speed and 34 ma for high-speed ? separate i/o voltage supply pins to minimize crosstalk ? input clock mode support, eliminates the external reference clock/oscillator ? fully integrated usb battery-charger detection with automatic hardware detection and software-controlled detection ? robust design to handle noisy clock and power supplies ? very good receiver sensitivity handling data errors with bad cables ? uart pass-through mode for serial application ? full industrial grade operating temperature range from ?40 c to +85 c ? esd compliance: ? jesd22-a114f 2 kv contact human body model (hbm) ? jesd22-c101-c 500 v charged device model (cdm) ? iec 61000-4-2 8 kv contact and 15 kv air on the dp and dm pins ? small foot print for efficient space utilization ? wlcsp25, tfbga36, hvqfn36/32/24 tar gete d applic at ions ? mobile phones ? digital still and video cameras ? digital tvs ? digital video disc (dvd) recorders ? media players ? set-top boxes (stb) ? gps personal navigation devices ? personal media players (pmps) ? external hard disk drives ? printers and multifunction printer (mfp) ? point of sale terminals ? test and measurement equipment ? gaming consoles ? industrial systems ? communications/networking equipment (wireless access points, lan switches, network routers) products f eatures isp1504 ISP1508 isp1514 isp1703 isp1704* form factor c ommercial product code isp15a1ettm isp15c1ettm isp15aettm isp15bettm isp151auts isp1auts isp1buts isp1aettm package type tfbga tfbga wlcsp25 wlcsp25 tfbga package dimensions (mm) (l x w x h) .5 x .5 x . .5 x .5 x . 2.2 x 2.21 x . 2.2 x 2.21 x . .5 x .5 x . ball or lead pitch (mm) .5 .5 . . .5 ulpi mode sdr sdr or ddr sdr sdr sdr features t ransparent u art mode no yes yes yes yes a ctive chip select pin polarity low aettm: high bettm: low high auts: low buts: high low and high usb charger detection supports resistive method supports resistive method supports resistive method battery charging spec. rev. 1. battery charging spec. rev. 1. i nput clock mode no no no yes no c rystals and clocks supported (mhz) a1ettm: 1.2 c1ettm: 2 1, 1.2, 2, 2 1.2 auts: 1.2 buts: 2 1.2, 2 c ontrol external charge pump/switch yes yes no no yes power main supply input voltage, v cc (v) . to .5 . to .5 . to .5 . to .5 . to .5 digital i /o input voltage, v cc(i/o) (v) 1.5 to . 1.5 to 1.5 1.5 to 1.5 1.5 to 1.5 1.5 to 1.5 v bus protection ( v) 5.5 limiting 5.5 limiting 5.5 limiting 1 5.5 limiting others operating temperature ( c) to +5 to +5 to +5 to +5 to +5 c harger detect pin polarity na na na low high usb application peripheral/host/otg peripheral/host/otg peripheral/host peripheral/host/otg peripheral/host/otg isp1 is ualied in emp reference platform design hi - spee d us b transceivers wi t h u lpi in terfa c e : f o r mobil e
products f eatures isp1507a/b isp1507c/d isp1507e/f isp1715 form factor c ommercial product code isp15abstm isp15bbstm isp15cbsum isp15dbsum isp15ebsum isp15fbsum isp115ahnum isp115aettm package type hvfn2 hvfn2 hvfn2 ahnum: hvfn aettm: tfbga package dimensions (mm) (l x w x h) 5 x 5 x .5 x x .5 x x .5 ahnum: 5 x 5 x .5 aettm: .5 x .5 x . ball or lead pitch (mm) - - - .5 ulpi mode sdr sdr ddr sdr features t ransparent u art mode no no no yes a ctive chip select pin polarity low no no low and high usb charger detection no no no supports resistive method i nput clock mode no no no no c rystals and clocks supported (mhz) abstm: 1.2 bbstm: 2 cbsum: 1.2 dbsum: 2 ebsum: 1.2 fbsum: 2 1, 1.2, 2, 2 c ontrol external charge pump/switch yes yes yes yes power main supply input voltage, v cc (v) . to . . to . . to . . to .5 digital i /o input voltage, v cc(i/o) (v) 1.5 to . 1.5 to . 1.5 to 1.5 . to . v bus 5 v output: charge pump (ma) 5 no 5 no v bus protection ( v) 5.5 limiting 5.5 limiting 5.5 limiting 5.5 limiting others operating temperature ( c) to +5 to +5 to +5 to +5 usb application peripheral/host/otg peripheral/host peripheral/host/otg peripheral/host/otg hi - spee d us b transceivers wi t h u lpi in terfa c e : g e n er ic products key f eature comments isp1102 isp1105 isp1110 uart mode isp1302 o t g with carkit support form factor c ommercial part code isp112bsts, isp112bstm, isp112awts, isp112awtm isp115bstm, isp115- wts, isp115wtm isp111vhts, isp111vhtm isp12uts package hbbc 1-pin, x x .5 mm 1-pin, x x .5 mm 1-pin, x x .5 mm na hvfn 1-pin, 2.5 x 2.5 x .5 mm 1-pin, x x .5 mm na na others na na na wlcsp25, 2.5 x 2.5 x . mm features single-ended receiver output vp/vm vp/vpo, vm/vmo bidirectional supported supported se/vm, dat/vp bidirectional diffrential data receiver output rcv supported supported supported supported driver data input vpo/vo, vmo/fse vpo/vmo vpo/vo, vmo/fse vpo,vmo seo/vm, da/vp bypass mode v reg (.) short to v cc(5.) supported supported na na disable mode only v cc(5.) connected na supported na supported sharing mode (isolate) v cc(i/) only supported supported na supported isolate mode power low i /o voltage level (v) 1.5 to . 1.5 to . 1.5 to 2.5 1. to . others sof tcon supported supported supported na r esistor 1.5 k external external internal internal (registers) data transfer rates full-speed and low-speed full-speed and low-speed full-speed full-speed and low-speed v bus detect supported na supported v bus comparator (otg) esd (on d+,d-,v cc(5.) ,and gnd) (kv) 12 12 - 2 t arget applications mobile phone, dsc dsc gsm,pda pda, dsc, mobile phone usb application peripheral/host peripheral/host peripheral peripheral/host/otg usb transceiv ers ? st-ericsson, 2009 - all rights reserved. st-ericsson and the st-ericsson logo are trademarks of the st-ericsson group of companies or used under a license from stmicroelectronics nv or telefonaktiebolaget lm ericsson. all other names are the property of their respective owners. for more information on st-ericsson, visit www.stericsson.com order code: usb transbr_2 lets create it to order the evaluation kits for these products, contact your local sales office or distributor. for product related information, contact wired.support@stericsson.com.
|
